Solvent-free, low odour

Good mechanical & chemical resistance

Seamless – prevents ingress of chemicals into the substrate and prevents bacterial growth

Hygienic – provide easy to clean dust free surface

Environmentally friendly

Available in variety of colours

PACKAGING

MASTERPAV EC10 SF EPOXY PRIMER 

4.5 & 1.0kg/set

MASTERPAV EC17 SL EPOXY COATING

4 & 20kg/set 

CONSUMPTION & COVERAGE

MASTERPAV EC10 SF EPOXY PRIMER 

0.3kg/m2

MASTERPAV EC17 SL EPOXY COATING

2.5kg/m2

SURFACE PREPARATION

The concrete surface to receive the MASTERPAV EC 17 SL Epoxy Coating shall be subjected to mechanical grinding to achieve a concrete surface profile (CSP) 1 – 3 as recommended by ICRI. 

It is recommended to conduct a concrete moisture test before the application of MASTERPAV EC17 SL Epoxy Coating. Concrete substrate shall have a moisture content of a maximum of 4%. For concrete substrates with moisture content higher than 4%, a moisture barrier is recommended.

All cracks are to be rectified before actual application.

PRIMER: MASTERPAV EC10 

Pour the entire content of Part B into Part A of MASTERPAV EC10.

Mechanically mix the mixture using a low-power mixer until homogeneous. 

Apply the mixed material using a suitable roller and allow it to dry overnight.

TOPCOAT: MASTERPAV EC17

The previously applied primer should be cured, dry to the touch, and no longer tacky. 

Light sanding the surface (promotes good bond between coats), followed by vacuuming.

Wipe clean the dust using a microfiber wipe with a suitable solvent (eg: MASTERPAV Thinner 101).

Pour the entire content of Part B into Part A of MASTERPAV EC17. 

Mechanically mix the mixture using a low-power mixer until homogeneous. 

Spread the mixed material evenly over the entire area at recommended coverage using suitable tools (eg: a notched squeegee). 

Let the coating to dry for 12 hours.

PROTECTION 

After application, it is recommended that the coated surface shall be protected from:

Foot traffic for a minimum of 24 hours after application;

Light vehicle traffic for a minimum of 7 days after application;

   

• MASTERPAV EC10 SF Epoxy Primer

   

• MASTERPAV EC17 SL Epoxy Coating