EPICPAV QUARTZ

DECORATIVE RESIN AGGREGATE SYSTEM

The MASTERPAV Decorative Resin Aggregate System is expertly crafted to elevate the aesthetic appeal of any indoor or outdoor area. Achieve a seamless surface with this incredibly resilient and adaptable system that enhances the aesthetic charm of the surrounding areas through the use of coloured pebbles and quartz. 

MASTERPAV EPICPAV Quartz is a highly popular decorative flooring system offering a wide choice of textures. It is available in many natural beautiful colour quartz fused to form a seamless surface with specially formulated, clear, and high-quality resins.

RECOMMENDED APPLICATION

Ideal for restaurants, showrooms, offices, cafeterias, recreation rooms, residential houses & etc.

  • Slide title

    Write your caption here
    Button

  • Slide title

    Write your caption here
    Button

  • BENEFITS


    Easy to trowel

    Vibrant quartz finishing

    Low maintenance

    Easy to clean

    Improve skid resistance

    Wide range of colours


  • SYSTEM INFORMATION

    PACKAGING

    MASTERPAV EP100 Resin Primer

    0.43 kg/set


    MASTERPAV EP800/EP801 Resin Binder

    2.5 kg/set


    Color Quartz E90

    10 kg/bag  


    CONSUMPTION & COVERAGE 

    1.8 - 2.0 m²/10kg set


  • INSTRUCTION FOR USE

    SURFACE PREPARATION

    The concrete surface to receive the MASTERPAV EPICPAV Quartz shall preferably be by mechanical scrabbling to achieve a concrete surface profile (CSP) 3 – 5 as recommended by ICRI. The concrete surface shall be thoroughly clean and free from any debris or dust with a high-pressure cleaning or vacuum machine.


    SURFACE PRIMING

    Apply 1 MASTERPAV EP100 Resin Primer coat to the substrate for better adhesion between the screed materials and the MASTERPAV EPICPAV Quartz.


    MIXING PROCESS

    Add the entire content of Part B into Part A container and mix till homogenous. 

    Add 10kg color quartz E90 to the mixture and blend them until homogenous.


    APPLICATION

    For vertical wall surfaces or skirting, it is best to use binder MASTERPAV EP801 Resin Binder while for floor surfaces only, it is recommended to use binder MASTERPAV EP800 Resin Binder. Installation of MASTERPAV EPICPAV Quartz is by using a non-rusty trowel. Properly compact the color quartz during installation to avoid uneven finishing. Screen any high spots until smooth and even. If the color quartz stuck to the trowel, wet the trowel with a bit of MASTERPAV Thinner 101. Special attention must be taken to ensure mixed materials are poured out from the container as soon as after mixed to prevent excessive heating during the chemical reaction within the container. The quartz also can be applied using the broadcasting method.


    TOPCOAT FINISHING

    MASTERPAV EPICPAV Quartz can be top coated with 1-2 coats of MASTERPAV PUC600 or MASTERPAV EC10 Primer Epoxy by using a brush or roller.


    PRECAUTION DURING & AFTER INSTALLATION 

    1. Do not leave the work half done. Application work must be done from one panel to another panel.

    2. Properly compact the color quartz binder during the installation to avoid uneven finishing after cure.

    3. Be sure to protect the finished work after the application of quartz and avoid being wet by rain, especially during the curing stage.

    4. Protect finish work to prevent dust before application of top coat.


  • REFER TO PRODUCTS


Colour Quartz Chart

Share by: