AQUATIC PEBBLES

DECORATIVE RESIN AGGREGATE SYSTEM

The MASTERPAV Decorative Resin Aggregate System is expertly crafted to elevate the aesthetic appeal of any indoor or outdoor area. Achieve a seamless surface with this incredibly resilient and adaptable system that enhances the aesthetic charm of the surrounding areas through the use of coloured pebbles and quartz.

EPICPAV QUARTZ

AQUARIC PEBBLES

MASTERPAV AQUATIC Pebbles is a highly popular decorative wall system offering a wide choice of textures and is available in many natural beautiful color pebbles fused to form a seamless surface with a specially formulated, clear, and high-quality binder.

RECOMMENDED APPLICATION

Ideal for restaurants, showrooms, offices, cafeterias, recreation rooms, residential houses & etc.

Slide title

Write your caption here

Button
Slide title

Write your caption here

Button
Slide title

Write your caption here

Button
Slide title

Write your caption here

Button

BENEFITS

Easy to trowel
Improve skid resistance
Low maintenance
Wide range of colours
Easy to clean
Good Weather Resistant
SYSTEM INFORMATION
PACKAGING
MASTERPAV AQ100 Aquatic Primer
0.6 kg/set

MASTERPAV AQ900 Aquatic Binder
4.0 kg/set (Pebbles #3)

Pebbles #3
19 kg/bag

CONSUMPTION & COVERAGE
1.8 - 2.0 m²/set (Pebbles #3)
INSTRUCTION FOR USE
SURFACE PREPARATION
The concrete surface to receive the MASTERPAV AQUATIC Pebbles shall preferably be by mechanical scrabbling to achieve a concrete surface profile (CSP) 3 - 5 as recommended by ICRI. The concrete surface shall be thoroughly clean and free from any debris or dust with a high-pressure cleaning or vacuum machine.

SURFACE PRIMING
Apply 1 coat of MASTERPAV AQ100 Aquatic Primer to the substrate for better adhesion between the screed materials and the MASTERPAV AQUATIC Pebbles.

MIXING PROCESS
Mix 19kg pebbles with 4.0kg of MASTERPAV AQ900 Aquatic Binder until homogenous.

APPLICATION
Installation of MASTERPAV AQUATIC Pebbles by using a non-rusty trowel. Properly compact the pebbles during installation to avoid uneven finishing. Screen any high spots until smooth and even. Leave it dry for 24 hours before applying any sealer series as a topcoat finish.

TOPCOAT FINISHING
MASTERPAV AQUATIC Pebbles can be top coated with 1-2 coats of MASTERPAV WB5.0 Water-based Sealer or any MASTERPAV Sealer series by using a roller or brush.

PRECAUTION DURING & AFTER INSTALLATION
1. Do not leave the work half done. Application work must be done from one panel to another panel.
2. Properly compact the pebbles binder during the installation to avoid uneven finishing after cure.
3. Ensure to protect the finished work after the application of pebbles and avoid wetness by rain, especially during the curing stage.
4. Protect finish work to prevent dust before application of top coat.
REFER TO PRODUCTS
MASTERPAV Aquatic Pebbles