Easy-to-use kit with a pourable consistency

Good chemical - resistant to a wide range of acids, alkalis, oils, etc

Excellent adhesion with concrete

Low viscosity ~ high penetration

Can be diluted with water or organic solvent

Consumption : N/A

Packaging         : 0.5kg/set

Note: The rate of consumption depends on the substrate porosity and texture.

APPLICATION INSTRUCTION

SURFACE PREPARATION:

GENERAL

The cracks line must be clean, dry and be free from any excess adhesive or foreign materials which could affect the adhesion. It may be necessary to rake excess adhesives from the cracks line to ensure a maximum, uniform grout joint depth is achieved. Any paint should be removed as most paint will be affected by the solvent vehicle and tends to wrinkle or partially dissolve. Any algae, mildew or mould should be killed and removed by the used of an approved product.

APPLICATION INSTRUCTION

MIXING

Open Part B and thoroughly stir to eliminate settling. Mix the content of Part B into Part A and stir until homogenous. 

APPLICATION

Can be applied by roller or brush. Ensure that sufficient materials is applied evenly over the entire surface to ensure maximum penetration. For application in enclosed areas, provide sufficient ventilation to ensure proper drying of the applied materials.