Slip Resistant Acrylic Sealer (AS3.0)

MASTERPAV AS3.0

Slip Resistant Acrylic Sealer

MASTERPAV AS3.0 Slip Resistant Acrylic Sealer is a solvent based clear finish which improve the skid resistance for the concrete flooring. It is highly advised to apply MASTERPAV AS3.0 by roller for an even finishing. It dries fast and imparts onto the concrete surfaces a semi gloss finish and good protection from surface staining. 


It is important to ensure that the surface receiving the MASTERPAV AS3.0 is dry, clean and free from dust prior application to ensure maximum adhesion.

  • BENEFITS



    Semi gloss

    Improve skid resistant

    Water resistant

    UV stable

    Easy to clean

    Colour enhancing


  • PRODUCT INFORMATION


    Packaging         :  20 liter

    Consumption  :  4 - 5 sq mtr per liter

    Shelf life             :   12 months if kept sealed and dry


    Note: Rate of consumption depends on the substrate porosity and texture.


  • INSTRUCTION FOR USE


    SURFACE PREPARATION

    Ensure the substrate is clean and dry. Remove any grease by detergent or alkaline etch. Loosely bound particles can be removed by air blower. Any algae, mildew or moss should be removed.


    MIXING

    Stir well before using.


    APPLICATION

    Apply using roller or brush. Allow sealer to dry for 24 hours for light traffic and at least 72 hours for heavy vehicle. For maximum protection, two coats of MASTERPAV AS3.0 can be applied, wait approximately 1 – 2 hours between coats.


    NOTE:

    MASTERPAV AS3.0 is not recommended for substrates that contain high moisture. Spot test can be conducted to determine if the surface which is ready to receive AS3.0.



Ready to get started?

Call us now

Share by: